Finger Lakes Extrusion makes flexible plastic tubing for industrial, automotive, dairy, medical, and biopharmaceutical customers from its shop in Upstate New York. Phil Scott runs the business with his sister Erica, leading a team of 25 across a floor that runs 24/5. Since putting their ISO 9001 quality system into Waybook, the time it takes to bring a new starter to fully trained operator has gone from 3 to 4 years to between 6 months and a year, turnover is well down, and Phil puts the value to the business so far at six figures.
Manufacturing runs on doing things the same way every time, and at Finger Lakes Extrusion that consistency lived in a thorough ISO 9001 quality system built on paper. When turnover picked up across the industry after COVID, Phil and Erica saw an opportunity to rebuild how the team learns.
The quality system was detailed, and it was document heavy. New starters read work instructions in an office, then carried what they had read out to the machine. With no pictures and no video, that was a long way for knowledge to travel.
Getting someone from their first day to running a line took 3 to 4 years. Finger Lakes Extrusion has been fortunate with people who stay a long time, so that pace worked well for years. When turnover increased after COVID, Phil went looking for something to reinvigorate the training process.
Outside the ISO documents, most of the detail lived in people’s heads. Every question a trainee had pulled an experienced operator away from their own machine, so the most knowledgeable people were effectively doing two jobs. Phil felt that load as much as anyone.
“Before Waybook, the on-the-job training was very heavy here. We had our own quality system, ISO 9001, and it was very document heavy, where we would need the employees to read a lot of just black and white paper. There were no pictures. There were no videos. It was very hard for them to read something in an office and have that translate out onto the shop floor where they were working.”
Waybook is now part of the ISO 9001 quality system rather than a tool sitting next to it. Phil describes it as the team’s truth: whatever the question, the answer is in one place, and the work gets done the same way every time.
Operators pull Waybook up on their phone, set it beside the machine they’re working on, and go down the list of steps. The documents carry pictures and video of that exact machine, down to what each button does, rather than a generic example. A trainee finds the answer where they’re standing instead of finding a veteran.
Each job description has its own Learning Path, so people learn what’s pertinent to their role rather than the whole quality system at once. A new hire gets a week of hands-on time with required time inside Waybook built into it, then works down their path. Deadlines on each document keep the pace honest: two days for the first work instruction, then two days for the next.
Waybook is integrated into the ISO system and rolled out to everyone, not just production personnel. Office procedures are going in now too, starting with production planning and sales. Every document has an owner, a visible record of what changed and when, and a review step, so keeping content current is delegated rather than landing on Phil.
“They can access any of these documents, any of these work instructions, to look up anything that they need to know. So it’s like their truth. A lot of times someone will ask someone how to do something and there’s a slight variation. Now they can go right to Waybook and they can look up the work instruction and it’s done the same way every time. It’s very important in manufacturing for the quality aspect of things, to have things done the same way every time.”
Phil’s approach to the build was to get everything in first and refine it later. Rather than designing the perfect structure up front, the team pushed their existing training documents into Waybook and improved them from there. A couple of years on, the whole quality system lives in it, and the office side is following.
“Go 100, 110% on day one. Get as much stuff in there as you possibly can. You can always tweak it. Don’t worry about the paralysis by analysis. Just brute force whatever you have, training documents, everything, get it in there and then tweak and tweak and tweak, and you’ll get something in the end that you could really rely on.”
A couple of years in, the change shows up in how fast people become operators, in who stays, and in how Phil spends his day.
Where it once took 3 to 4 years to bring someone to full competence, Finger Lakes Extrusion has had a new starter get there in 6 months. Phil puts the current average at 6 months to a year. It also means lines run rather than sitting idle for want of a trained operator.
Asked what Waybook has been worth, Phil’s own estimate across the couple of years they’ve been running it is at least six figures. He’s clear the dollar figure isn’t the whole picture either, because a good share of the return shows up as less turnover, less burnout, and better employee satisfaction.
Turnover is a lot lower than it was. Newer recruits take to the technology quickly, and the longer-serving operators see the benefit because they’re spending far less of their week bringing someone else up to speed.
A trainee’s first stop is Waybook, not the nearest experienced operator. Production keeps moving through onboarding, and the trainee gets what they need at the machine, in the moment.
“It’s taken the amount of time for someone to be a fully trained operator from 4 years to, well, 6 months to a year. That is huge. So that means we have the confidence to run quality product with the people we have, instead of saying, ‘Well, we’ve got to leave this line down because we don’t have someone trained to run it.’
The reporting has changed Phil’s role as much as the training has changed the floor. Each morning he can see who’s been in Waybook and how progress is tracking, then point his direct report toward whoever needs a nudge, or tell the team when they’ve put in good work. Filtering by document shows him how long people spend on something and where they get stuck, which tells him whether a document is genuinely difficult or just written confusingly. Less day-to-day for Phil means more time on the aspirational parts of the business and driving sales.
“I feel it. I can certainly feel it. I can see it on the faces of people. When you have turnover, and now it’s way less of that, it’s like, okay, we’re pointing the tip of the spear. Everyone’s aligned and we got a good crew of people right now.”
Finger Lakes Extrusion runs three Learning Paths today, one for each job title. Phil is building that into a longer ladder, with a pay increase at every level and more to learn to reach it. Procedures for the office are being written now, and Phil sees that foundation as what lets the business bring more people in.
“Right now we have three pathways in there, which is three job titles, but that’s going to grow. We’ve been working on a larger ladder for people, so they can see the pathway here. It’s not just three job descriptions, it’s going to turn into eight at some point. And every level is a pay increase. With every pay increase, you need to learn more.”
Phil describes Waybook as documentation control, then training, then something wider than both, because almost any part of the business can live in it. His point is that scaling takes processes, and those processes have to be well documented. With that foundation in place, Finger Lakes Extrusion can put the right people in the right seats and get them trained fast.